Featured
How To Change Car Tyre
How To Change Car Tyre. Turn them counterclockwise until you are able to loosen them by hand later. Every car has dedicated jacking points for which you would have to consult your handbook.

Place all the tools back in the tool kit, and you can resume driving after confirming the tyre pressure. One of our most experienced patrols show you how to simply and safely change a tyre if you're stuck with a puncture. Turn your hazards on take all the caps and covers off loosen all wheel nuts
Do Not Tighten Them Hard Until The Jack Is Removed.
Use the nut opening wheel wrench. Ensure the ground is flat and free from gravel or mud. Place the tyre on the wheel hub.
Place The Fresh Wheel On That Place And Tighten The Wheel Nuts.
It should be quick and easy to remove the wheel nuts from your car, helping you to take the punctured wheel off your car and replace it with your spare. It’s important to not discard your old, punctured tyre and give it to your dealership or garage. Place a warning triangle 50m behind the car if.
Switch On The Parking Or Hazard Light.
Avoid slopes and soft ground and park as far away from traffic as possible. Now slowly lower the jack and tighten the wheel nuts completely. Remove the tyre and place out of the way of your working area and any oncoming traffic or pedestrians.
Use The Spare Tyre You Have In Your Car To Replace The Damaged Tyre.
Cars these days usually come with wheel covers for the tyres. Turn your hazards on take all the caps and covers off loosen all wheel nuts Lower the car and tighten the bolts.
Apply Slight Leverage To The Entire Circumference Of The Hub Cap Until It Loosens And Comes Off Easily.
Now, take out the wheel from the wheel hub. With the vehicle on the ground it prevents this from happening. We recommend to replace your tyre if:
Comments
Post a Comment